MC-Bauchemie Distributor in Ghaziabad & Delhi NCR
Specification-grade injection resins, EN 1504 concrete repair systems and protective coatings from MC-Bauchemie, Germany — stocked in Sahibabad, delivered across NCR, and applied by crews who inject these resins every week.
German Family Company. Making In India Since 1986.
MC-Bauchemie Müller GmbH & Co. KG was founded in 1961 in Bottrop, Germany, and remains family-run — one of Europe’s leading construction chemicals manufacturers. India was MC’s first subsidiary outside Europe, established in Mumbai on 1 January 1986, with a production plant for admixtures, repair and sealing products running at Ankleshwar, Gujarat since 1988 and the India head office in Navi Mumbai.
MC is a specification-driven brand: when a structural consultant writes an acrylate curtain injection, an EN 1504 repair system or a crack-bridging anti-carbonation coating into the BOQ, MC is usually the mark on the drawing. Its EmceColor-Flex protective coating was used on the Mumbai Trans Harbour Link — India’s longest sea bridge.
As authorized distributor we hold ready stock of the fast-moving injection, repair and grouting lines, and arrange plant-direct supply for project quantities.
The MC-Bauchemie Range We Supply.
Eight product families, from rebar primer to floor topping — genuine, batch-coded, with German technical datasheets.
Concrete Repair
Nafufill KM 220 / 230 / 250 structural repair mortars, Nafufill LM levelling mortar, sprayable Nafufill GTS and Nafufill MK rebar corrosion protection.
Repair & retrofittingInjection Systems
MC-Injekt GL-95 acrylate hydrogel, MC-Injekt 2033 fast-foaming PU resin and Centricrete ultrafine cement suspension.
Injection resinsWaterproofing
Expert Proof bitumen-free thick coatings, Nafuflex bituminous coatings and MC-Special DM crystalline sealing mortars.
Waterproofing rangeProtective Coatings
MC-Color and EmceColor-Flex crack-bridging anti-carbonation coatings, Emcephob hydrophobic impregnations.
Full catalogueIndustrial Flooring
MC-DUR epoxy and PU resin coatings and self-levelling systems for factories, warehouses and car parks.
Flooring serviceGrouts
Emcekrete non-shrink, free-flow cementitious grouts and micro-concrete for machine foundations, base plates and jacketing.
Grouting productsAdmixtures
MC-PowerFlow PCE superplasticizers, Centrament plasticizers and Centrilit NC pozzolanic additive for high-performance concrete.
Construction chemicalsJoint Sealing
Mycoflex 210 one-component PU sealant for construction and expansion joints, with good weathering and UV resistance.
Sealants rangeThe Specification Choice For Injection & Repair.
Three injection chemistries cover practically every leak and crack we see on NCR sites.
| System | Chemistry | What it solves |
|---|---|---|
| MC-Injekt GL-95 | Low-viscosity acrylate hydrogel | Curtain injection behind basements, leaking joints and masonry — swells on water contact, stays permanently flexible |
| MC-Injekt 2033 | Fast-foaming flexible PU resin | Stopping active water ingress in concrete, masonry and subsoil |
| Centricrete | Ultrafine cement suspension | Rigid structural injection of cracks, voids and cavities — higher strengths than normal cement grouts |
We don’t just sell the resin. Our own injection grouting crews pump these systems with the right packers, NRV nipples and machines — so the material, method and workmanship come from one accountable supplier. For structural crack repair and jacketing, the same logic applies through our retrofitting service, and for machine-base and anchor work see our epoxy grouting range.
- Ready NCR stock of MC-Injekt and Nafufill fast movers
- Injection pumps, packers and crews available with the material
- Plant-direct supply from Ankleshwar for project quantities
- German technical datasheets and method statements on request
MC-Bauchemie FAQs.
Are you an authorized MC-Bauchemie distributor in Ghaziabad?
Yes. We supply factory-sealed, batch-coded MC-Bauchemie material with GST invoice from our Sahibabad counter, with daily dispatches across Delhi NCR — Noida, Greater Noida, Delhi, Gurugram, Faridabad — and pan-India for project lots.
Which MC-Bauchemie resin stops an active water leak?
MC-Injekt 2033 — a fast-foaming, flexible PU injection resin — is the first response for active ingress. For area sealing behind the structure, MC-Injekt GL-95 acrylate hydrogel is injected as a curtain. We supply both with packers and pumps, or send our injection crew to do the job.
Is MC-Bauchemie material imported or made in India?
Both. MC-Bauchemie (India) has run a production plant at Ankleshwar, Gujarat since 1988 — India was MC’s first subsidiary outside Europe, founded in 1986 — and specialty lines are supported from Germany. Either way, you get genuine material through the authorized channel.
Do you also apply MC-Bauchemie systems?
Yes. Our trained crews carry out PU and acrylate injection, Nafufill concrete repair and MC-DUR flooring — see injection grouting and retrofitting services.